3 – Event Messages
Critical Events
59060-04 A
3-49
A
(C) (8400.005C) (Switch) (The switch will be reset in several seconds in order to activate
the Transparent mode configuration changes.)
Meaning:
Configuration changes which affect Transparent mode or
Transparent mode port mappings, will result in the switch being
reset.
(C) (8400.005C) (Switch) (The switch will be reset in several seconds to transition to full
mode)
Meaning:
The configuration is changing to convert from transparent mode to
full fabric mode which will result in a switch reset.
(C) (8400.005D) (Switch) (Upgrading License for SANdoctor)
Meaning:
The SANdoctor bundle license was applied successfully.
(C) (8400.005E) (Switch) (Upgrading License for Transparent Switch Mode change
capability.)
Meaning:
The Transparent Mode license was applied successfully.
(C) (8400.005F) (Switch) (Upgrading License for SMI-S capability)
Meaning:
The Common Information Model (CIM) license was applied
successfully.
(C) (8400.0060) (Switch) (Warning-Illegal transparent mode configuration, primary and
backup cannot be mapped to the same port. Port port_number 's backup
mapping has been deleted.
Meaning:
When mapping TH ports to TF ports, the primary and backup TF
ports cannot be the same for a given TH port.]
(C) (8400.0061) (Switch) (Warning-Illegal transparent mode configuration, Either the
primary or backup map for port port_number was set to a port whose type is
not TF. The mapping for this port has been cleared.
Meaning:
An attempt was made to map a TH port to a port that was not of
type TF.
(C) (8400.0062) (Switch) (New firmware has been installed.)
Meaning:
New firmware was successfully installed.
(C) (8400.0065) (Switch) (The switch is being automatically hardreset after leaving the
Diagnostics AdminState.)
Meaning:
The switch automatically undergoes a hard reset after leaving the
Diagnostics administrative state.
