3 – Event Messages
Alarm Events
3-32
59060-04 A
S
(A1007.0007) (Security: Fabric Binding (ESA) not supported on remote switch and Fabric
Binding is enabled, failing security checks)
Meaning:
Either fabric binding is not enabled on the remote switch or the
remote switch does not support security at all.
Action:
Check the security configuration on the remote switch.
(A1007.0008) (Security: ESA Response failure, failing security checks)
Meaning:
A failure was received during processing of the ESA received
frame. Either the payload did not match the standard layout or the
payload status indicated a reject.
Action:
Check for errors on the remote side of the link. Check the
transceiver and cable. Update firmware on remote switch.
(A1007.0009) (Security checks EFMD response failure, failing security check.)
Meaning:
A remote switch rejected a EFMD frame. The port will be isolated.
Action:
Check remote switch for the reason that the EFMD frame was
rejected. It is possible that the FabricBindingEnabled parameter is
different on the two switches.
(A1007.000A) (Security: Dropping lock held by domain domain_id for number seconds)
Meaning:
A remote switch has held the fabric lock for too long. Local switch
is dropping the lock in order to send out a Exchange Fabric
Membership Data (EFMD) frame.
Action:
None.
(A1007.000B) (Security: EFMD Rejected, bad revision)
Meaning:
The remote switch is running at a different Exchange Fabric
Membership Data (EFMD) version level than the local switch. Ports
will isolate.
Action:
None
(A1007.000C) (Security policy restrict mode, security db differs)
Meaning:
The current security policy calls for restrict mode which means that
all switches in the fabric must have the same security databases or
the ISLs will not login. In this case, the security databases differ.
Action:
Reconfigure the active security set so that the ISL group members
are the same.
