Qiagen QIAgility, Руководство пользователя

Страница: 58 / 334

Installation Procedures
4-18 QIAgility User Manual 11/2011
Note : This COM port number might change depending on
the use of other virtual COM ports on your computer.
QIAgility software will mark the correct virtual COM port
number with an asterisk (*). You can check the COM port
number in the hardware manager of your computer.
4.7.4 Installation of AC power cord
Important: The QIAgility Software must be installed on the
computer before the QIAgility is switched on (see Section
4.5.4).
Connect the QIAgility to the power outlet as follows:
1.
Ensure that the power switch of the QIAgility is set to the
off position.
2. Check that the voltage rating on the label at the back of
the QIAgility matches the voltage available at the
installation site.
3. Plug the power cord into the main power input socket.
4. Plug the power cord into a grounded power outlet.
Important : The wall socket should be easily accessible.
5. If the QIAgility Software has been installed on the
computer, you can switch the instrument.
4.8 Hardware Wizard