Qiagen QIAgility, Руководство пользователя

Страница: 238 / 334

Instrument Setup and Calibration
7-4 QIAgility User Manual 11/2011
15. Click on the “OK” button.
16. Place a tip onto the pipetting head, and then click on the
“OK” button to continue.
17. The instrument will now locate the tip ejector and will
eject the tip.
18. Click on the “Finished” button.
19. The following message box will appear.
20. Click on the “OK” button to save the tip ejector
calibration.
7.1.2 Calibrate plate positions
Before using a plate on the worktable, a position calibration
must be performed. Plate position calibrations can be saved
and reused.
Important : Tip Rack Holder calibrations must be performed
before any other plate type can be calibrated.
Caution : The Y-arm will move during position calibration
when the lid is raised. Do not click on any software buttons
while parts of your body are within the instrument worktable.
Before starting the procedure:

Open the instrument lid.

Place plates to be calibrated onto the worktable.