Qiagen QIAgility, Руководство пользователя

Страница: 110 / 334

QIAgility Software
5-48 QIAgility User Manual 11/2011
Changing the plate type
Before starting a run the correct plate type must be selected
in the software. The physical plate type in use at a given
location on the worktable must match the plate type selected
for this location in the software. This ensures that the
software uses the correct calibration settings for that plate.
To change the plate type in the software, proceed as follows:
1. Position the cursor above the plate that is to be changed.
Right-click on the mouse. The plate operations menu will
appear.
2. Select “Change plate type” from the plate operations
menu.
3. The “Plate Configuration” dialog box will appear.
4. Select a plate type from the “Select Plate Type” drop-
down menu. The “Plate” list will be automatically
updated.
5. Select a plate from the “Plate” list.
Note : If you cannot find a plate type that matches, or is
very similar to the plate that you are using, please
contact QIAGEN Technical Services.
6. Click on the “OK” button to continue.
Changing the plate function
Before starting a run the correct plate function must be
selected for each plate on the worktable. Some plates (e.g.,
Reagent Blocks) have more than 1 segment. Different plate
functions can be selected for different segments of the same
plate. There are 7 plate functions — “Sample”, “Reagent”,
“Mix”, “Reaction”, “Standard”, “Diluent”, and “Tip”.
Sample A sample is always added to a reaction
last. Samples must be assigned to a
sample bank before they can be used in a
reaction setup.