Qiagen QIAgility, Руководство пользователя

Страница: 225 / 334

Operating Procedures
QIAgility User Manual 11/2011 6-13
2. The instrument will complete the current operation and
will then pause. The following dialog box will appear.
3. Click on the “Continue Run” button to continue the run,
or click on the “Abort Run” button to abort the run.
4. The instrument lid must be closed to abort the run.
Note : A run will also be paused when the instrument lid
is opened.
Note : The instrument does not stop immediately when
the lid is opened. Therefore, wait until the Y-arm has
stopped moving and the warning screen is displayed
before continuing.
Note : An aborted run cannot be restarted from the point
at which it was aborted.
6.6 Exception handling
If an exception (i.e., an error or warning) occurs during a
run, an alarm will sound for 60 seconds, and then at 30
second intervals. A dialog box which contains information
about the error will appear. This box has 4 buttons — “Abort
run”, “Retry operation”, “Ignore error”, and “Skip step”. See
Section 9.3 for more information about specific warnings
and errors.
Abort run Click this button to abort the run.
Retry operation The instrument will discard the current tip.
The Y-arm will move to its resting
position. This provides access to the
worktable, allowing the error to be
resolved. Click on the “OK” button to
continue with the run.
Ignore error The instrument will continue with the run
as normal.