Q CELLS Q.VOLT-G2 HYB-4.6kW.1.1, Руководство по установке

Страница: 32 / 118

• Step 1 : Mark guideline on floor.
- Bolt : M12-16 x L30 mm (Min)
• Step 3 : After assembling Stand Column on
Mount plate, tighten Screw(M8x16, 4point).
4.3 Floor Mount - Mounting Instructions
25 I
Installation
NOTICE
• The Floor Mount must use the frame provided by the manufacturer, All four directions
should be fastened with bolts to the bottom.
Mount Plate
(1ea)
Battery Inverter
Stand Column
(2ea)
D-Bracket
(2ea)
L-Bracket
(4ea)
Screw M8x16
(8ea)
Screw M6x8
(4ea)
Nut M8
(2ea)
340 mm
430 mm 40 mm
STEP 1
• Step 2 : L-Bracket (Screw M8x16, 4point)
D-Bracket (Screw M6x8, 4point)
STEP 2 STEP 3
[ Figure 4-9 : Floor Mount Part List ]
• Step 5 : Secure the Mount plate to the floor. • Step 4 : After tightening the Upper Wall Bracket,
tighten the nut (M8, 2point).
* Use the Wall Mount Screw
to disassemble it.
STEP 4 STEP 5
M8x45, Washer
(2 point)
M12-16 Nut,
Washer (4Point)