Q CELLS Q.VOLT-G2 HYB-4.6kW.1.1, Руководство по установке

Страница: 29 / 118

4.2 Mounting Instructions
This product must be installed on the wall considering appropriate environments described in previous
pages. Follow the mounting instruction described below exactly and securely.
* NOTE
When attaching the wall bracket to a wall, adjust the horizontal level using inclinometer.
• Step 1 : Mark guideline on wall.
- Drill hole : size = Ø10 / Length = 45-55 mm
- Upper bracket : 3 EA
- Lower bracket : 2 EA • Step 2 : Get ready for the upper bracket.
- Step 2-1 : Detach Anchor bolt.
- Step 2-2 : Insert the Anchor bolt into the bracket.
CAUTION
There is risk of injury if the ESS is lifted incorrectly or dropped while being transported
or when attaching it to or removing it from the wall mounting bracket.
Transport and lift the ESS carefully.
It is important to ensure the drilling locations are not located on any electrical wiring
within the wall.
Installation
I 22
Diameter
Wall Mount Screw
GND Screw
L Touque
[ Figure 4-4 : Bracket on the Wall in Step 1, 2 ]
[ Table 4-1 : Screw Specification ]
M8
M4 45 mm
8 mm
20 kgf
10 kgf
208.5 mm
498 mm
150 mm 150 mm
208.5 mm
STEP 1 STEP 2
STEP 2-1
STEP 2-2