PURSUIT 2865 DENALI, Руководство пользователя

Страница: 122 / 175

2865 DENALI
Lifting
It is essential that care be used when lifting your boat. Make sure the spreader bar at each sling
is at least as long as the distance across the widest point of the boat that the sling will surround.
Put the slings in position. The positions are marked with small labels on each side of the boat
under the rubrails.
Elevating lifts are commonly used to store boats for extended periods. To provide proper
support, the bunks that support the hull should be aligned with and run parallel to the hull
stringers. The bow and stern eyes (if so equipped) should not be used as sole support for
storage.
Notice: Boats can be damaged from improper lifting and rough handling when being
transported by lift trucks. Care and proper handling procedures must be used
when using a lift truck to move the boat. Never attempt to lift the boat with a
substantial amount of water in the bilge.
Notice: Severe gelcoat cracking or more serious hull damage can occur during hauling and
launching if pressure is created on the gunwales (sheer) by the slings. Flat, wide
belting slings and spreaders long enough to keep pressure from the gunwales are
essential. Do not allow anyone to haul your boat when the spreaders on the lift are
not wide enough to take the pressure off the gunwales.
14-2
Sling Locations