PURSUIT 2865 DENALI, Руководство пользователя

Страница: 30 / 175

2865 DENALI
WITH SERVICING CONTROL SYSTEM PROCEDURES. CONTROL MISADJUSTMENT CAN
CAUSE LOSS OF CONTROL AND SEVERE ENGINE OR OUTDRIVE DAMAGE.
Steering System Maintenance
A periodic inspection of all steering hoses, linkage and helm assemblies should be made. Signs
of corrosion, cracking, loosening of fastenings, excessive wear, or deterioration should be
immediately corrected. Failure to do so could lead to steering system failure that would result
in loss of control.
The engine driven power steering system has specific fluid and maintenance requirements. The
fluid level and belt tension should be checked frequently. Please refer to the engine owner's
manual for maintenance information on the power steering system.
Trim Tab Maintenance
Marine growth can interfere with the proper operation of the trim tab planes and actuators. To
reduce problems due to marine growth, always return the trim tabs to the full “UP” position after
operating the boat and periodically inspect and clean marine growth from the actuators and
planes.
The trim tab fluid should be checked often. Keep the fluid level between the marks on the trim
tab pump reservoir with the trim planes in the “up” position.
If your Denali will be left in saltwater for extended periods, it will be necessary to
monitor the zinc anodes on the trim tab planes. The anodes were installed at the
factory to prevent galvanic corrosion and will need to be changed when they are
75% of their original size. Refer to the trim tab owner's manual for additional
maintenance information and fluid specifications.
FAILURE TO PROPERLY INSPECT AND MAINTAIN THE STEERING AND CONTROL SYS-
TEMS CAN LEAD TO A CONTROL SYSTEM FAILURE AND LOSS OF CONTROL. MAKE
SURE YOU INSPECT AND SERVICE THE STEERING AND ENGINE CONTROL COMPONENTS
FREQUENTLY.
2-6