PURSUIT 2865 DENALI, Руководство пользователя

Страница: 68 / 175

2865 DENALI
8.2 Windshield Ventilation
The windshield is equipped with opening panels on each
side to provide ventilation. To open the panels, loosen
the friction knobs on the windshield adjusters and turn
the locks on the vent panels to the unlocked position.
Open the panel to the desired position and tighten the
friction knobs. The adjusters will hold the windshield
panel in that position.
To close the vent panels, loosen the friction knobs on the
adjusters and close the vent. Then turn the panel locks
on the windshield to the locked position and tighten the
friction knobs on the adjusters.
Notice: To avoid damage to the wiper arms, be
careful not to open the windshield vent
panels too far.
8.3 Engine Compartment Ventilation
All Pursuit inboard/outboard boats are equipped with engine compartment ventilation. The
ventilation system is designed to meet or exceed the requirements of the United States Coast
Guard in effect at the time of manufacture.
Free Air System
A flow of air into the engine compartment is provided by
vents located on the stern hull sides. Exhaust vent hoses,
located on either side of the engine, provide a flow of air
out of the engine compartment. The exhaust hose ducts
reach to the lower part of the engine compartment. This
provides adequate air movement while operating at or
near cruise speeds.
Forced Ventilation
All Pursuit inboard/outboard boats are equipped with electric blowers
that provide ventilation to the engine compartment prior to start up and
while operating below cruise speed. The blowers should be operated
for five (5) minutes prior to the operation of the engine or any electrical
accessory.
Bilge Blower
8-2
Windshield
Windshield Adjuster
Bilge Vent