PURSUIT 2865 DENALI, Руководство пользователя

Страница: 112 / 175

2865 DENALI
• Make sure the tow BALL and COUPLER are the same size and bolts nuts are tightly
secured.
• The COUPLER MUST BE COMPLETELY OVER THE BALL and the LATCHING
MECHANISM LOCKED DOWN.
• Make sure the TRAILER IS LOADED EVENLY from front to rear as well as side to side
and has the correct weight on the hitch. Too much weight on the hitch will cause the rear
of the tow vehicle to drag and may make steering more difficult. Too little weight on the
hitch will cause the rig to fishtail and will make controlling the tow vehicle difficult.
Contact your Pursuit dealer or the trailer manufacturer for the correct weight on the hitch
for your trailer.
• The SAFETY CHAINS must be attached crisscrossing under the coupler to the frame of
the tow vehicle. If the ball was to break, the trailer would follow in a straight line and
prevent the coupler from dragging on the road. Make sure the trailer emergency brake
cable or chain is also installed to the tow vehicle frame.
• Make sure the LIGHTS on the trailer function properly.
• CHECK THE BRAKES. On a level parking area roll forward and apply the brakes several
times at increasing speeds to determine if the brakes on the tow vehicle and
trailer are working properly.
• Make sure the tow vehicle has SIDE VIEW MIRRORS that are large enough
to provide an unobstructed rear view on both sides of the vehicle.
• CHECK THE TIRES and WHEEL BEARINGS.
MAKE SURE YOUR TOWING VEHICLE AND TRAILER ARE IN COMPLIANCE WITH ALL
STATE AND LOCAL LAWS. CONTACT YOUR STATE MOTOR VEHICLE BUREAU FOR LAWS
GOVERNING THE TOWING OF TRAILERS.
12-16