Pulsafeeder Pulsalube 8 GS Ultra, Руководство по эксплуатации и техническому обслуживанию

Страница: 83 / 198

Ausgabe
issue
C / 17.03.2006
Dokument
document
OM.HBD.01 XV
Blatt
sheet
1 (2)
9
Dismantling / Reassembly
9.3 Holding band - assembly
9.3.1 Prepare the holding band
¾ Only use prefabricated double-band holding bands.
9.3.2 Check the holding band
9.3.3 Assemble the holding band
9.3.4 Correct tension of the holding band (HBD)
Correct
Incorrect
 Bent-over holding band (HBD) is in contact
with holding band loop (SCL) to avoid
damaging universal joint sleeve.
¾ Press on holding band (HBD) using tool
(WZ) if necessary.
SCL WZ
HBD
ø
b
¾ Use tool (W3/mounting tool)
¾ Feed holding band into tool (W3).
¾ Hold ends of holding band with the eccen-
tric lever (EX).
¾ Turn the crank (KU) until the holding band
is strained and lies against the holding
band loop (SCL).
¾ Carefully pull the holing band together until
it is in contact with the circular groove of
universal joint sleeve.
W3
SCL
EX
KU
The holding band (HBD) has drawn in the out
shape of the universal joint sleeve and is
firmly seated.
The holding band (HBD) is too loose, can slip
off.
HBD
HBD