Pulsafeeder Pulsalube 8 GS Ultra, Руководство по эксплуатации и техническому обслуживанию

Страница: 193 / 198

HELICAL-WORM SOLID SHAFT/FLANGED
OIL FILL QUANTITIES
RETAIN FOR FUTURE USE
U12500 - 1 of 1
Type M1 M2 M3 M4 M5 M6
Quarts Liters Quarts Liters Quarts Liters Quarts Liters Quarts Liters Quarts Liters
SK 02040 VF 0.53 0.50 0.85 0.80 0.79 0.75 0.63 0.60 0.53 0.50 0.53 0.50
SK 02050 VF 0.42 0.40 1.59 1.50 1.32 1.25 1.27 1.20 0.95 0.90 0.79 0.75
SK 13050 VF 0.79 0.75 1.90 1.80 1.59 1.50 1.80 1.70 1.11 1.05 0.95 0.90
SK 12063 VF 0.53 0.50 2.06 1.95 1.80 1.70 1.85 1.75 1.27 1.20 1.00 0.95
SK 13063 VF 1.06 1.00 2.43 2.30 2.01 1.90 2.32 2.20 1.43 1.35 1.16 1.10
SK 12080 VF 0.95 0.90 3.91 3.70 3.38 3.20 3.59 3.40 2.64 2.50 2.43 2.30
SK 13080 VF 1.69 1.60 4.02 3.80 3.70 3.50 4.12 3.90 2.85 2.70 2.64 2.50
SK 32100 VF 1.48 1.40 6.66 6.30 6.45 6.10 6.45 6.10 4.23 4.00 3.80 3.60
SK 33100 VF 2.80 2.65 7.61 7.20 6.76 6.40 8.03 7.60 4.54 4.30 4.02 3.80
SK 42125 VF 3.17 3.00 12.2 11.5 12.2 11.5 11.6 11.0 8.88 8.40 7.71 7.30
SK 43125 VF 4.97 4.70 15.9 15.0 13.7 13.0 16.9 16.0 9.51 9.00 8.14 7.70
www.nord.com/docs 12.22.14
NORD Gear Corporation
Toll Free in the United States: 888.314.6673
NORD Gear Limited
Toll Free in Canada: 800.668.4378
Helical-worm solid shaft/flanged lubrication
The following NORD Gear reducers are shipped from the
factory with a pre-determined oil fill level in accordance
to the specified reducer size and mounting position. For
additional information, please refer to the “Oil Plug & Vent
Locations” documentation for your gear unit.
STOP
HARMFUL SITUATION
STOP
Actual oil volume can vary slightly depending upon the
gear case size, mounting and ratio. Prior to commission-
ing the reducer, check the oil-fill level using the reducer’s
oil level plug and drain or add addition oil as needed. The
minimum acceptable oil level is 0.15 in (4mm) below the
oil level hole.
For mounting orientations other than shown please consult
NORD Gear. Reducer modifications may be required.