Pulsafeeder Pulsalube 8 GS Ultra, Руководство по эксплуатации и техническому обслуживанию

Страница: 45 / 198

1
Safety
Ausgabe
issue
C / 11.10.2005
Dokument
document
OM.SAF.01 XV
Blatt
sheet
3 (4)
1.3 Dangers that can be caused by the machine
6((3(; machines are built in accordance with the state of the art.
Nevertheless, there is a residual risk, because the machine works with:
• Mechanical movements that pose a danger
• Electrical voltages and currents
We have used design measures and applied safety technology to minimi
] e the risk to the
health of people posed by this danger.
1.4 Qualification of the personnel
This handbook is intended for:
• Owner
• Operators
• Setters
• Maintenance personnel
1.5 Authori ] ed people
People authori ] ed to undertake operation, set up and maintenance are instructed and trained
specialists employed by the owner/manufacturer.
The owner is responsible for:
• Personnel training
• Compliance with safety regulations
• Compliance with operating and maintenance instructions
The operator must:
• Have received instruction
• Read and understood the relevant parts of the operating instructions before starting work
• Know the safety devices and regulations
1.5.1 Tasks and information for the owner/operators
¾ Regularly check and maintain the machine, replacing all parts in good time which no longer
guarantee safe operation.
¾ It is essential to comply with the procedure described in the operating instructions for shut-
ting down the machine.
• On completion of work, attach all safety and protective devices and make sure they are
functioning.
1.5.2 Safety notes for maintenance, inspection and assembly work
¾ Do not work on the machine or system unless it is stationary and depressurised.
¾ Switch off the master switch and pull out the power plug before starting work on live com-
ponents.
¾ Comply with the procedure for shutting down the machine as described in the Shut-down
chapter.
¾ Decontaminate (de-toxify) machines that are used for pumping media that can be harmful
to health.
¾ Refer to the Initial start-up chapter before repeated start-up of the machine.
Detailed technical knowledge is essential for performing any work on the machine.