Pulsafeeder Pulsalube 8 GS Ultra, Руководство по эксплуатации и техническому обслуживанию

Страница: 28 / 198

Schutte & Koerting • 2510 Metropolitan Drive • Trevose, PA 19053 • USA • tel: (215) 639-0900 • fax: (215) 639-1597 • www.s-k.com • sales@s-k.com
8
Water Jet Eductors Bulletin 2M
Fig. 258 and Fig. 268 Tank Mixing Eductors
Fig. 12. FIG. 258 TANK
MIXING EDUCTOR.
Discharge.
Can be threaded
or plain.
Suction
Liquid
Flow Suction
Liquid
Flow
Pressure Connection
Fig. 13. FIG. 258 TANK MIXING
EDUCTOR.
Standard units are made in cast
iron and bronze but can be made
in many other materials on special
order. Large sizes can be
fabricated instead of cast.
Fig. 14. FIG. 268 TANK
MIXING EDUCTOR.
3/8” and 3/4” sizes.
Suction
Liquid
Flow Suction
Liquid
Flow
Discharge
Pressure
Liquid
Pipeline
Pressure
Connection
Fig. 16. FIG. 268 TANK MIXING
EDUCTOR.
This design is used for 1 1/2” (8 7/8”
overall length x 4 1/8” overall width), 2”
(12 1/4” overall length x 5 7/8” overall
width) and 3” (17” overall length x 8
1/8” overall width) pressure
connection sizes. All are cast in one
piece and have female thread
connections for installation on nipples
welded into the pressure liquid piping.
The 1 1/2” and 2”
sizes are stocked in
cast iron, bronze, and 316 stainless
steel. The 3” size is stocked in cast
iron and stainless steel only. Other
materials can be supplied on special
order.
Fig. 15. FIG. 268 TANK MIXING
EDUCTOR.
This design is used for 3/8” (3 3/4”
overall length and 1 3/4” overall width),
and 3/4” (5 1/4” overall length and 2
3/8” overall width) pressure
connection sizes. It is threaded
directly into threads tapped into the 1
1/2” diameter or larger pressure liquid
pipeline. It is cast in one piece and is
stocked in cast iron, bronze and 316
stainless steel. Other materials can
be supplied on special order.
Fig. 17. FIG. 268 TANK
MIXING EDUCTOR.
1 1/2” size and over.
Suction
Liquid
Flow Suction
Liquid
Flow
Discharge
Pressure
Liquid
Pipeline
Pressure
Connection