ProSoft Technology RadioLinx RLX2-IHA, Руководство пользователя, Страница: 88 / 248

RLX2-IHx Series ♦ 802.11a, b, g, n Configuring a Radio - Detailed Configuration
Industrial Hotspots User Manual
ProSoft Technology, Inc. Page 88 of 248
Parameter
Description
SD Auto Write Enable
Select this check box to have the radio write a copy of its configuration
to the microSD card whenever new settings are saved from the web
configuration interface. The radio renames previous radio configuration
files with a unique file name that allows you to audit changes made to
the radio's configuration.
SD Auto Clone Enable
Select this check box to have the radio use the configuration from the
microSD card when the radio powers up.

If a microSD card is present and has a configuration file that is
different from the radio's current configuration, the radio uses the
configuration from the SD Card.

If the configuration on the micro SD card matches the radio's
configuration, or there is no configuration file on the SD Card, then
no action is taken.

If you insert a microSD Card into a running radio, and if the
configuration file on the SD Card is different from the radio's
current configuration, the radio warns you by flashing the Signal
Strength, MOD and NET LEDs. If you reboot the radio or cycle
power to the radio, it uses the configuration from the microSD
card.
If you want to save this control as enabled (checked), either the SD
card slot in the radio must be empty, or you must enable the
SD A
UTO
W
RITE
E
NABLE
control before saving. If these conditions are not
present, the software disables this control before saving. This prevents
the unit from unintentionally reverting back to a configuration file on the
SD Card after resetting.

To use the configuration file on an SD card when this control is
already enabled, insert the SD card and cycle power to the radio.

If this control is not enabled, enable and save the setting without
the SD card inserted (click
A
PPLY
C
HANGES
), then insert the SD
card, and then cycle power to the radio.
Note: Do not enable SD A
UTO
W
RITE
E
NABLE
if you do not want the
active configuration file on the SD card to be replaced when the unit
loads and saves the SD card's current configuration file.
Write SD Card
Immediately writes a copy of the unit's configuration file to the SD
card, independent of the SD A
UTO
W
RITE
E
NABLE
setting.