RLX2-IHx Series ♦ 802.11a, b, g, n
Configuring a Radio - Detailed Configuration
Industrial Hotspots
User Manual
ProSoft Technology, Inc.
Page 115 of 248
Parameter
Description
QoS Map Table
Specifies up to eight separate match criteria to identify and assign priority
values to received Ethernet packets. Each filter has several parameters that
you can enable by selecting the check box to the left of each parameter.
When you enable multiple parameters in a row, all enabled parameters in that
row must match before the radio assigns the specified
P
RIORITY
value to a
packet.
P
RIORITY
-
The priority value the radio assigns to the received Ethernet frame
if it was not already marked with a priority value and if all enabled parameters
in the same row match.
S
OURCE
IP
A
DDRESS
-
A parameter match occurs for all packets received from
the device with this source IP address.
D
ESTINATION
IP
A
DDRESS
-
A parameter match occurs for all packets received
addressed to the device with this destination IP address.
S
OURCE
P
ORT
N
O
.
-
A parameter match occurs for all IP packets received with
this source port value.
D
EST
P
ORT
N
O
.
-
A parameter match occurs for all IP packets received with
this destination port value.
P
ROTOCOL
N
O
.
-
A parameter match occurs for all IP packets received with this
protocol number.
P
ACKET
L
ENGTH
-
A parameter match occurs for all iP packets received with
the correct packet length.
You must enter a packet length threshold
You must select the match criteria:
Select < to match if the length of the received packet is
LESS THAN
the
threshold.
Select
to match if the length is
GREATER THAN OR EQUAL TO
the threshold.
Select both < and
to match
ALL PACKET LENGTHS
.