ProSoft Technology RadioLinx RLX2-IHA Скачать руководство пользователя страница 151

Страница: 151 / 248

RLX2-IHx Series ♦ 802.11a, b, g, n

Using the IH Browser to Manage your Radios

Industrial Hotspots

User Manual

ProSoft Technology, Inc.

Page 151 of 248

Session Log

The

Session Log

is located at the bottom of the

Serial Logging Dialog

. It contains a

session log of all the events and state changes that took place during logging.

The

Session Log

is saved to the base

Output Directory

with the following format:

session_mm.dd.yyyy-hh.mm.ss.txt

Example:

session_03.06.2019-13.56.39.txt

The date and time in the session log name is the time that the Session was started (i.e.
the Dialog was opened).

Within the daily directories the individual hourly logging file will be created with the
following format:

APname-IPaddr-mm.dd.yyyy.hh.mm.ss.txt

Содержание RadioLinx RLX2-IHA

























































































































































































































































Результаты поиска

Содержание RadioLinx RLX2-IHA

Отзывы:

ProSoft Technology RadioLinx RLX2-IHA, Руководство пользователя, Страница: 151 / 248

Результаты поиска

Содержание RadioLinx RLX2-IHA

Отзывы: