Promise Technology VTRAK 15100, Руководство пользователя

Страница: 87 / 192

Chapter 4: Management with WebPAM PRO
79
Change Console LUN
The RAID Console LUN is the Controller’s SCSI address. LUN stands for Logical
Unit Number. Essentially it is a subdivision of a SCSI Target ID.
The default setting for the RAID Console is TID 0, LUN 7. This setting is
adequate for most WebPAM and RAID subsystem configurations. If an address
conflict occurs, you might have to change the Console LUN setting. You must
have Creation Rights to access this function.
To access the Console LUN Settings:
1. Click on the Controller Settings menu and select Change Console LUN
Settings.
The Change Console LUN screen displays.
2. For SCSI Channel 1, in the center column, select the SCSI Target ID number
under which you want to set the Console LUN.
3. In the right column, select the LUN for the Console.
4. Repeat steps 2 and 3 for SCSI Channel 2.
5. Click the Submit button when you are done.
Change SCSI Target ID
The term Target ID refers to the SCSI address of the two channels on the RAID
subsystem. A SCSI bus has an Initiator, such as the SCSI card inside the Host/
RAID PC, and at least one Target, such as the Controller and Logical Drives
inside the RAID subsystem. Each target must have its own address or Target ID
number. Target IDs can be divided into Logical Unit Numbers (LUNs) to extend
the number of available addresses.
The default TID settings for both SCSI channels is 0. This setting is adequate for
most WebPAM and RAID subsystem configurations. If an address conflict occurs,