Promise Technology VTRAK 15100, Руководство пользователя

Страница: 58 / 192

VTrak 15100 User Manual
50
Assign a SCSI Target ID
VTrak has two SCSI channels. Each channel can have up to 16 Target ID (TID)
numbers. The default TID is 0 (zero). This assignment might conflict with your
SCSI Host Bus Adapter card. To add, change or delete Target ID numbers:
1.
Press 1 to select Controller management .
2. Press 2 to select Modify controller parameters .
3. Press 1 to select Modify SCSI Channel TID . The screen appears as shown
below:
SCSI Channel # TIDs
---------------------------------
1 0
---------------------------------
2 0
Please select the SCSI channel(1–2)
Press R to return after finished>
4. Press the number of the SCSI channel whose TID numbers you want to
modify. Press R when you are done selecting channel(s).
5. Press Y to confirm that you want to make a change.
Note that the TID numbers you type will overwrite the existing ones. Type all
the TIDs you want for this channel, including any numbers you previously
assigned.
6. Type the numbers of the TIDs you want to for this SCSI channel with a space
between each number. Press Enter to continue.
The CLU responds:
TIDs for SCSI channel X changed.
Press any key to
return
To verify the new TIDs, Press 1 to select Modify SCSI Channel TID again.