Promise Technology VTRAK 15100, Руководство пользователя

Страница: 168 / 192

VTrak 15100 User Manual
160
Event Notification
When you select Event Notification, WebPAM PRO sends popup and/or email
messages regarding its status. The messages you see depend on your
notification selection (see Chapter 4) and what is currently happening in the
VTrak.
The chart below gives the suggested action when the corresponding message is
displayed.
Event Action
Controller Notification
Controller Unknown Error Unspecified problem with the Controller.*
Data Parity Error
SCSI data parity error.*
Command Parity Error SCSI command parity error.*
Bus Reset The Initiator sent a command to reset the SCSI bus,
to correct a problem.*
Unrecoverable Error Restart the Promise Product to clear the problem.*
Abort Task A normal event. Result of user action.
Clear ACA Cleared an auto contingent alliance condition.*
LUN Reset A normal event. Result of user action.
Initiator Error SCSI error on the HBA card.*
Illegal Secondary Identify A target received a second Identify message with a
different LUN.*
Message Parity Error SCSI message parity error.*
Bus Reboot The VTrak rebooted itself.*
* An occasional incident of one of these messages
does not necessarily indicate a problem. However,
if any of these messages appears repeatedly,
contact Technical Support.
Connection Notification
Connection Made Normal result of logging in.
Connection Lost Normal result of logging out. Also a result of poor
SCSI cable or network connection.
Disk Notification
Disk Down Identify the disk drive involved. Power down the
system, remove and test the drive. Replace the drive
as needed.