ProLinx 6202-WA-DFNT-DFCM3, Руководство пользователя

Страница: 79 / 190

Diagnostics and Troubleshooting 6202-WA-DFNT-DFCM3 ♦ ProLinx Gateway
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
ProSoft Technology, Inc. Page 79 of 190
February 2, 2009
3.2 LED Indicators
Troubleshooting the operation of the DFNT ports can be performed using several
methods.
The first and quickest is to scan the LEDs on the module to determine the
existence and possibly the cause of a problem. This section provides insight into
the operation of the Serial Port status LEDs. Information on other LEDs can be
found in the
ProLinx Reference Guide or in the product User Manual.
3.2.1 Ethernet LED Indicators
LED State Description
Off No activity on the port. Data
Green Flash The port is either actively transmitting or receiving data.
Off No connection to hub or network is detected. Link
Green Solid
Connected to hub or network correctly. This is the normal
operating state.
3.2.2 LEDs for the PWP Port
The following table lists LED status descriptions of the ProSoft Wireless Protocol
module.
LED Status Indication
ACT
(Green)
6 flashes per second. The PWP is working normally in that it is successfully sending
and receiving data. All nodes on the link should be flashing in
this pattern.
RF Signal Blinking in 8 / 2
second intervals RF signal lost after successful connection.
One or more LEDs
illuminated RF signal present, number of LEDs illuminated corresponds
to signal strength LED values in module configuration file.
Off No RF signal detected after power up.
Blinking in 1 second
intervals Not connected.
Flashing Green The port is either actively transmitting or receiving data.
RF LINK
Blinking in 8 / 2
second intervals RF signal lost after successful connection.
Blinking in 5 second
intervals Not connected.
Flashing Green The port is either actively transmitting or receiving data.
RF DATA
Blinking in 8 / 2
second intervals RF signal lost after successful connection.