Reference 6202-WA-DFNT-DFCM3
♦
ProLinx Gateway
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
ProSoft Technology, Inc.
Page 149 of 190
February 2, 2009
An example rung used to execute a read command is shown in the following
diagram:
The
Message Configuration
dialog box must be completed to define the data
set to transfer to the processor from the module. An example of the dialog box
follows:
Complete the dialog box for the data area to be transferred. For PLC5 and SLC
messages, the
Source Element
should be an element in a data file (that is,
N7:0). For the PLC2 Unprotected Read message, the
Source Element
is the
address in the module's internal database and cannot be set to a value less than
ten. This is not a limitation of the module but of the RSLogix software.
Additionally, the
Communication
information must also be configured. An
example of the dialog box follows:
Содержание 6202-WA-DFNT-DFCM3
Страница 4: ......
