ProLinx 6202-WA-DFNT-DFCM3, Руководство пользователя

Страница: 47 / 190

Configure the Module 6202-WA-DFNT-DFCM3 ♦ ProLinx Gateway
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
ProSoft Technology, Inc. Page 47 of 190
February 2, 2009
Each command list record has the same general format. The first part of the
record contains the information relating to the communication module and the
second part contains information required to interface to the DF1 slave device.
Command Entry Formats
Note: The format of each command in the list is dependent on the function being executed. Refer
to the Reference chapter for a complete discussion of the DF1 commands supported by the
module and of the structure and content of each command.
The following table shows the structure of the configuration data necessary for
each of the supported commands.
The first part of the record is the Module Information, which relates to the ProLinx
module and the second part contains information required to interface to the
slave device. Refer to the slave device documentation for a full discussion of
each function.
Command list example:
[DF1 Port 1 Commands]
# The file contains examples for a SLC 5/03 processor.
#
START
# 1 2 3 4 5 6 7 8 9 10 11
# Internal Poll Swap Node Func File File Elm Sub
# Enable Address Interval Count Code Address Code Type # # Elm
1 1510 0 5 0 3 501 N 10 10
0 1515 0 2 0 3 509 N 10 0
1 1500 0 10 0 3 502 N 10 0 0
END