ProLinx 6202-WA-DFNT-DFCM3, Руководство пользователя

Страница: 23 / 190

Configure the Module 6202-WA-DFNT-DFCM3 ♦ ProLinx Gateway
Wireless EtherNet/IP to DF1 Master/Slave-3 ports
ProSoft Technology, Inc. Page 23 of 190
February 2, 2009
2.5.1 [Radio Configuration]
The Radio Configuration section contains basic configuration parameters for the
radio. The following settings configure the radio.
Signal LED 1, 2, 3, 4
SIGNAL LED 1: 20
SIGNAL LED 2: 25
SIGNAL LED 3: 30
SIGNAL LED 4: 35
The Signal LEDs on the front of the module indicate the current quality (signal
strength minus noise) of the radio signal. The parameter for each LED
determines the signal strength level at which the LED will illuminate.
After the module powers up, all signal LEDs will be off. When the module
establishes a connection to another module, the signal LEDs will display the
strength of the radio signal.
If the radio communication is dropped when in ad-hoc mode (for example, if the
other radio is turned off), the signal strength LEDs will flash periodically at a rate
of approximately 10 seconds on and one second off.
Transmit Rate
This parameter defines the data rate(s) for transmission of directed messages.
Possible values are outlined in the following table.
Value Definition
1 Fixed 1 Mbit (1)
2 Fixed 2 Mbit (2)