3302C Series Mainframe Operation Manual 4-13
CLE clear the PROT and ERR status byte register, the PROT and ERR status byte
register will be indicated
〝
0
〞
after execute the CLE command.
STORE
Purpose
：
STORE the load level and load status into the memory of the 3250A, 3310, 3330A
and 3320 series electronic LOAD.
Command syntax
：
STOR{SP}{m[,n]}{;|NL}
Description
：
Parameter m is 1~5 for 5 different states with 3250A and 3310A series electronic
load module's load status and load current into the non-volatile memory in the 3250
and 3310A series electronic load.
Parameter m is 1~5 for 5 different states with 3320 series electronic load module's
load status and load current into the EEPROM memory in 3302C mainframe.
Parameter n is 1~30 for 30 memory bank for 150 (m*n) different state with
3330A/3310C series electronic load module's load status and load current into the
EEPROM memory in the 3330A and 3310C series electronic load.
For Example
：
STORE 1; store the 3250A, 3310A and 3320 series electronic load module's load
status and load current into the memory 1.
STORE 2,30; store the 3330A and 3310C series electronic load module's load
status and load current into the memory 147.
RECALL
Purpose
：
Recall the state of load level and status which is stored by GPIB/RS232 STORE
command.
Command syntax
：
REC{SP}{m[,n]}{;|NL}
Description
：
This command is used to recall the memory state which is store into the memory
by GPIB/RS232 store command, up to 5 states can be recalled for 3250A, 3310A
and 3320 series electronic load module, up to 150 state can be recalled for 3330A
and 3310C series electronic load module.
For Example
：
REC 1; Recall the state of load level and status which is stored in memory 1 by
GPIB/RS232 STOR command.
REC 147; Recall the state of load level and status which is stored in memory 147
by GPIB/RS232 STOR command.
SYNCHRONOUS ON/OFF
