3302C Series Mainframe Operation Manual 4-23
AUTO
∣
R2
(suitable for 333XA/331XC series)
Command Syntax:
CC {AUTO
∣
R2}{
；∣
NL}
Description:
To set up AUTO RANGE/RANGE II function
To set up AUTO RANGE auto change RANGE I/II
To explain:
To set up RANGE II not auto change RANGE I/II TO choose in RAGNE II
Note: CC AUTO/Ran2 Function is available in 3302C REV
：
2.8 or later
Function is available in 3310C REV
：
3.05 or later
Function is available in 3311C REV
：
3.05 or later
Function is available in 3312C REV
：
3.06 or later
Function is available in 3314C REV
：
3.05 or later
Function is available in 3315C REV
：
3.05 or later
Function is available in 3330A REV
：
3.17 or later
Function is available in 3331A REV
：
3.17 or later
Function is available in 3332A REV
：
3.17 or later
Function is available in 3333A REV
：
3.17 or later
Function is available in 3334A REV
：
3.17 or later
OCP:START
(suitable for 3330A/3310C series)
Command syntax:
OCP:START {SP}{NR2}{;|NL}
Description:
The initial current of OCP testing.
OCP:STEP
(suitable for 3330A/3310C series)
Command syntax:
OCP:STEP {SP}{NR2}{;|NL}
Description:
The increment step current of each OCP test.
OCP:STOP
(suitable for 3330A/3310C series)
Command syntax:
OCP:STOP {SP}{NR2}{;|NL}
Description:
The maximun current of OCP test.
OCP:VTH
(suitable for 3330A/3310C series)
Command syntax:
OCP:VTH {SP}{NR2}{;|NL}
Description:
The threshold voltage when UUT output voltage is equal or lower than V-th during
OCP test.
