4-10 PRODIGIT
VOLTAGE Level
Purpose
：
The load voltage setting in Constant Voltage mode.
Command Syntax :
CV:{HIGH|LOW}{SP}{NR2}{;|NL}
CV:{SP}{NR2}{;|NL}
Description
：
CV:{HIGH|LOW}{SP}{MISS}{;|NL}
This command is used to set the load voltage level of 3310A/3310C series
Electronic load module.
CV {SP}{NR2}{;|NL}
This command is used to used to set the load Voltage level of 3330A series
electronic load module.
Note:
1.The load voltage data must include decimal point, otherwise this command is
unable to execute. The most effective load voltage level can be set is the sixth
digit after the decimal point.
2.The HIGH load level load voltage MUST be higher than LOW level load voltage
for proper HIGH/LOW voltage level definition, the load voltage difference
between programmed HIGH and LOW level is 10 times of resolution, the 3310
series Electronic Load will adjust and limit of the programmed values.
If the programmed HIGH level is equal or less than LOW level, the 3310 series
load module will adjust and limit HIGH level to be higher 10 times programming
resolution of LOW level, and vice versa at the programmed LOW level is equal
or more than HIGH level.
3.If the programming load voltage level over the maximum specification at
programmed range of 3310 series load module, the full scale voltage will be
sent to the load module.
4.The engineering unit for load voltage is Volts.
5.Please refer to Appendix C for proper programming procedure of 3310 series
electronic module.
For Example
：
CV:LOW 3.0 set LOW level load voltage to 3.0 V.
CV:HIGH 45.123456 set HIGH level load voltage to 45.123456 V.
POWER Level
Purpose:
The load power setting in Constant Power mode.
Command Syntax:
CP:{HIGH|LOW}{SP}{NR2}{;|NL}
Description:
This command is used to set the load Power level of 3310C series electronic load
module.
Note : Mode CP is available in 3310C series only.
