Power One Aurora PVI-10.0-I-OUTD-400, Инструкция по установке и эксплуатации

Страница: 50 / 395

Use and installation manual Page
49
of
97
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
The following table shows all the possible combinations of LED activation,
with reference to the operational state of AURORA.
Key:
LED on
LED flashing
LED off
Any of the above conditions
LED STATUS
OPERATIONAL
STATUS
NOTES
1
green:
yellow:
red: AURORA self-
disconnection
Input voltage less than 70%
of the set start-up voltage for
both inputs
2
green:
yellow:
red: AURORA initialization,
loading the settings, and
waiting for grid check It is in a transition status due
to operating conditions
being checked
3
green:
yellow:
red: AURORA is powering
the grid
The machine is operating
normally (search for the
maximum power point or
constant voltage)
4
green:
yellow:
red: Anomaly detected in the
isolation system
Leakage to the ground
detected
5
green:
yellow:
red: Anomaly – fault!!! The fault may be internal,
or it may be an external
anomaly,
refer to the alarm which
will appear on the LCD
display