Power One Aurora PVI-10.0-I-OUTD-400, Инструкция по установке и эксплуатации

Страница: 76 / 395

Use and installation manual Page
75
of
97
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
5.5.6.14 Alarm Message
Follow the procedure described below in order to program the error message that
will be shown on the display:
Pressing the ENTER key will allow you to access the relevant submenu
Select the desired function by moving the arrow with the UP / DOWN keys and
press ENTER to navigate the submenus or select the functions.
After enabling the customized message, please compose the text of the message.
By selecting Compose Message, you can compose the first line of the message:
The maximum numbers of characters is 16. Pressing the Enter key 17 times will
allow you to move to the second line.
To write the message, use the display keys, following the instructions below:
Use the ENTER key to scroll from one position to the next (from left to
right)
Use the ESC key to return to the previous position (from right to left)
Press the ESC key several times to return to previous menus, as described
in chapter 5.5.3
Use the UP key to scroll through the numbers, letters and symbols in
ascending order
Use the DOWN key to scroll through the numbers, letters and symbols in
descending order
Message line 2:
- - - - - - - - - - - - - - - - Message line 1:
- - - - - - - - - - - - - - - -
Enable / Disable
Compose message
Enable message
Disable message Enable / Disable
Compose message
Alarm Message