Power One Aurora PVI-10.0-I-OUTD-400, Инструкция по установке и эксплуатации

Страница: 57 / 395

Use and installation manual Page
56
of
97
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
5.5.3 First phase - Electric parameter check
GENERAL QUESTIONS RELATING TO THE USE OF DISPLAY KEYS:
During regular operation, the display will cycle through available data. The screens
change every 5 seconds, or can be alternated manually by pressing the UP (2
nd
key
from display) and DOWN (3
rd
key from display) keys.
In any case, to return to the previous menu, press the ESC key (1
st
key from
display).
Fig. 21
Activation of cyclical scrolling is indicated by the 2 arrows in the top left-hand
corner of the display (Fig
.
21).
Scrolling can be blocked by pressing the ENTER key (4
th
key from display). A
padlock symbol will appear (Fig
.
21).
If the measures performed previously (chapter .5.5.1) are found to give a positive
result, then the system will continue with other checks. The following screens
repeat cyclically as described in the paragraph “GENERAL QUESTIONS
REGARDING THE USE OF DISPLAY KEYS”.
Type and p/n of the inverter
Serial number of the inverter and the firmware revision level.
E-da : Daily quantity of energy produced.
$-da: Daily energy savings. The value is expressed in the set currency.
E-tot -------------
E-par 0 KWh EUR
E-da 0 Wh
$-da 0.0 EUR
S/N--------- xxxxxx
FW rel. C.0.1.1
Type OUTD
PN------------