Use and installation manual
Page
71
of
97
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
If the inverter is not connected to the distribution grid, when you attempt to
perform one of these tests the following message will appear:
5.5.6.10
Alarm
The inverter is equipped with an alarm system which allows for the switchover of a
relay contact (available both as a contact normally set open - N.O. - and as a
contact normally set closed– N.C.). The relay contacts are accessible from the front
cover as shown in Fig
.
22. This contact can be used, for example, to activate an
acoustic or visual alarm. In any case, the contact voltage/current rating of 230V/1A
must not be exceeded.
Fig. 22 - Alarm contact terminal block
This function can activate different modes of alarm. By pressing the ENTER key,
you can access the following submenu.
The selected entry will be highlighted by an arrow on the left-hand side of the
display. Change the selection by using the UP / DOWN keys and press ENTER to
confirm it.
PRODUCTION: the relay is switched over only activated when the
inverter is connected to the grid.
Production
Alarm
Alarm (conf.)
Twilight
Inv.not tied
Test impossible!
Содержание Aurora PVI-10.0-I-OUTD-400
Страница 46: ...Use and installation manual Page 45 of 97 PVI 10 0 12 0 I OUTD S 400 Rev 1 3 Fig 19 Data Transmission Options ...
Страница 99: ...AURORA Inverter Fotovoltaici MANUALE INSTALLAZIONE E OPERATORE Model number PVI 10 0 12 0 I OUTD S 400 Rev 1 3 ...
Страница 143: ...Manuale d uso e installazione Pagina 45 di 97 PVI 10 0 12 0 I OUTD S 400 Rev 1 3 Fig 19 Data Transmission Options ...
Страница 196: ...AURORA Photovoltaik Wechselrichter INSTALLATIONS UND BEDIENUNGSHANDBUCH Model number PVI 10 0 12 0 I OUTD S 400 Rev 1 3 ...