PolyVision
21
Using
ē
no mini
Unpairing the
ē
no stylus from your computer
The
ē
no stylus Bluetooth signal pairs with only one computer at a time. To
use the
ē
no stylus with a different computer that is in the same room, you
need to unpair it from the original computer before you pair it with a new
computer.
If the stylus is paired to a computer that has the PolyVision Bluetooth
adapter is plugged in, or if the computer uses built-in Windows Bluetooth
capability, you can unpair the stylus using the PolyVision driver.
To unpair the
ē
no stylus from the computer using the PolyVision driver:
1. On the paired computer, click the PolyVision icon in the system tray
(Windows) or system menu (Macintosh).
2. Choose “Configure the PolyVision driver” from the menu.
3. Click the “Hardware” tab.
4. Turn on the
ē
no stylus by removing its cap, then click “Remove
ē
no
stylus.”
note:
NOTE:
If you have a Macintosh with operating system 10.3.9, follow the steps you
would normally use to remove hardware on the computer.
If you are using third-party Bluetooth capability, unpair the stylus using
instructions provided by your product. The stylus is listed as device ADP-
301.
Operating
ē
no mini
ē
no mini control icons
You can access the functions of the
ē
no control icons in two ways:
Ŗ
by tapping the control icons at the top of the
ē
no mini with the stylus
Ŗ
by configuring the PolyVision driver to project on-screen control icons in
a window that you can drag around the screen, then tap the icons using
the stylus (Refer to "Using on-screen tools" on page 65.)
9A67)DQQMHO2CIG(TKFC[,WPG#/
