II. Connecting with CCTV Cameras and Video Servers
NVR 4000/4200/4300
To set up the NVR system in your LAN environment:
Attention
Please configure the IP address of the Video Server before
connecting to the NVR.
1. Connect the AC adapter to the DC IN Jack of the video server.
2. Plug the AC adapter into a standard wall outlet.
3. Connect the coaxial cable to the video input port of the Video Server from the
CCTV camera.
4. Connect CCTV power cord to an outlet, if any.
5. Plug the RJ-45 connectors into LAN port of NVR and Ethernet Port of the
video server.
6. Plug the RJ-45 connectors into WAN port and Router’s LAN port.
7. Turn on the Router (Router with UPnP on/off function is recommended).
8. Plug the AC adapter into the DC-Jack of the NVR. Attach the power cable to
the AC adapter. Plug the other end of the power cable into a standard AC
power outlet.
9. Connect PC or Laptop with Router LAN port.
10. Insert the Installation CD, included with your NVR, into your CD-ROM drive.
11. Double click the “vcredist_x86.exe” file in your language on the CD-ROM to
install the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).
12. Run the “Network Device Search Tool” application on the CD-ROM.
14
