Chapter I. Setup the NVR
Before you setup the NVR (Network Video Recorder), please make sure all
components are available and ready.
A list of the package contents is provided in the
Box Contents
section of this guide. If any items are damaged or missing, please
contact the vendor where you purchased your NVR or our customer service directly.
Setup the NVR System
I. Connecting with IP Cameras
NVR 4000/4200/4300
To set up the NVR system in your LAN environment:
Attention
Please configure the IP address of the IP cameras before
connecting to the NVR.
1. Plug the RJ-45 connectors into LAN port of NVR and IP camera RJ-45 port.
2. Plug the RJ-45 connectors into WAN port and Router’s LAN port.
3. Turn on the Router (Router with UPnP on/off function is recommended).
4. Plug the AC adapter into the DC-Jack of the NVR. Attach the power cable to
the AC adapter. Plug the other end of the power cable into a standard AC
power outlet.
5. Connect PC or Laptop with Router LAN port.
6. Insert the Installation CD, included with your NVR, into your CD-ROM drive.
7. Double click the “vcredist_x86.exe” file in your language on the CD-ROM to
install the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).
8. Run the “Network Device Search Tool” application on the CD-ROM.
10
