Planer Kryo360-1.7, Руководство оператора

Страница: 60 / 80

56 Liquidus Tracker
2. Then press the Enter key.
3. The display will then change to the profile selection screen.
Select profile
<my_profile_1>
4. Use the cursor keys to select the profile that you want to run and then press the Enter key.
5. The display will then change to the Profile run screen.
3.4.3 Profile run screen
When a profile is running, either when initiated from DeltaT or from an internal profile , the
controller displays detailed information about the run and its progress.
The first stage of the run is while the controller takes the chamber to the start temperature. For
more information on how the system starts the cooling run, see the
Going to start temperature
section.
3.4.3.1 Going to start temperature
The profile will have been programmed with a start temperature at which the run should begin. When
a run is initiated the controller will begin to control the chamber to bring it to the required
temperature. During this phase the display will show that the system is going to start.
Chamber 25.0 C Sample 25.1 C
Going to start - press stop key to
abort
When the start temperature has been reached, the system will start to beep and the Information
LED will begin to flash, indicating that user intervention is required.
Chamber 20.0 C Sample 20.0 C
At start : press Enter
Press the Enter key to begin the run.
Warning
If a stirring lid is in use, do not start the run unless the lid has been fitted to the chamber.
The display will then change to its normal run screen.
55 55
56