Planer Kryo360-1.7, Руководство оператора

Страница: 34 / 80

30 Liquidus Tracker
11.If the separate power supply is in use, connect a power supply cable to the power supply and
connect the cable to a free mains power outlet.
Warning
The mains power outlet is the main disconnect device for the power supply. Ensure that the power
supply cable used is no longer than 3m, and that the power outlet is easily accessible.
12.If the stirring controller is in use, plug the stirring controller power supply to a free mains power
outlet.
Warning
The mains power outlet is the main disconnect device for the power supply. Ensure that the power
supply cable used is no longer than 3m, and that the power outlet is easily accessible.
Warning
Position the stirrer power supply away from potential fluid spills.
2.4 Installing the software
In order to run the Liquidus Tracker you will need to install DeltaT and CFGPID on the PC. CFGPID
is only used for configuring the system and is not required for day-to-day operation of the system.
To install DeltaT, run the installation program. CFGPID.exe does not require installation and can
just be copied to any folder on your PC to which you have read and write access.