Pioneer AVIC N4 - Navigation System With DVD player, Руководство по эксплуатации

Страница: 132 / 180

130
Chapter
8
Customi
zing
the AV Source Setting
AV
1
Touch “Mute Input/Guide” in the Initial
menu.
Each touch of the “ Mute Input/Guide ”
changes the settings as follows:
•
Mute — Muting
• ATT — Attenuation
• Normal — Volume does not change
❒ Operation returns to normal when the
phone connection (the mute signal on the
yellow/black lead) is ended or when the
navigation guidance is ended.
❒ Even when you receive a phone call, navi-
gation voice guidance cannot be attenu-
ated or muted. Use
Volume to control the
navigation voice guidance volume.
Switching the 5.1CH setting
When the navigation system is combined with
the multi-channel processor system (sold sepa-
rately), you can use the multi-channel sound.
Enter the following setting when combining the
multi-channel processor system.
• DO NOT enter this setting before you con-
nect the multi-channel processor system.
(If this setting is entered, the RCA (“SUB-
WOOFER OUTPUT or NON-FADING OUT-
PUT”) will output maximum volume for
the multi-channel processor system.) Pio-
neer is not responsible for any damage to
the speaker equipment caused by ignoring
this warning.
❒ This setting is possible only when the optical
cable connection box (supplied with the Mul-
tichannel processor) is connected to the navi-
gation system.
1
Touch “5.1CH” in the Initial menu.
If you touch “ 5.1CH ”, it will be turned “ On ”. If
you touch “ 5.1CH ” again to turn “ Off ”.
Other Functions
Selecting the video for “Rear
display”
You can choose either to show the same image
as the front screen or to show the selected
source on the “Rear display”.
1
Press the AV button to switch AV opera-
tion screen.
2
Press the MENU button and then touch
“REAR SCREEN”.
Each touch of “ REAR SCREEN ” changes the
settings as follows:
•
Mirror — The video on the front screen of
the navigation unit is output to the “Rear
display”
• DVD — The video and sound of the DVDs
are output to the “Rear display”
• AV1 — The video and sound of the AV-1
are output to the “Rear display”
• AV2 — The video and sound of the AV-2
are output to the “Rear display”
❒ When Mirror is selected, the following
restrictions are applied to “Rear display”.
— When selecting “ Rear View ” in the map
display, nothing is displayed.
— All sounds cannot be output for “Rear dis-
play”.
— The map screen navigation images output
to the “Rear display” differ from standard
NTSC format images. Therefore, their quality
will be inferior to the images that appear on
the front screen.
❒
When DVD is selected, the following
restrictions are applied to “Rear display”.
— When a CD or MP3/WMA/AAC disc is set
in the built-in DVD drive, nothing is output.
❒ When AV1/AV2 is selected, the following
restrictions are applied to “Rear display”.
— The “Video image” and sound are output
only when the
AV-1/AV-2 has both video and
sound.
O
ther Functions