129
Chapter
8
Cu
st
om
izing t
h
e AV So
urce
S
etting
AV
2
Press the MENU button to change to the
AV MENU.
3
Touch “Initial”.
Setting the rear output and sub-
woofer controller
The navigation system’s rear output (rear speaker
leads output and RCA rear output) can be used
for full-range speaker (
Rear SP
Full
) or sub-
woofer (
Rear SP
Sub. W
) connection. If you
switch the rear output setting to the
Rear SP
Sub. W
, you can connect a rear speaker lead
directly to a subwoofer without using an auxiliary
amp.
Initially, the navigation system is set for rear full-
range speaker connection (
Rear SP
Full
). When
rear output is connected to full range speakers
(when
Rear SP
Full
is selected), you can con-
nect the RCA subwoofer output to a subwoofer.
In this case, you can select whether to use the
subwoofer controller’s (low pass filter, phase)
built-in
Preout
Sub. W
or the auxiliary
Preout
Full
.
❒
When 5.1ch setting is “
On
”, the rear output
and subwoofer setting is not available.
1
Touch “Rear SP” in the Initial menu.
2
Touch “Rear SP” to switch the rear out-
put setting.
When no subwoofer is connected to the rear
output, select
Full
.
When a subwoofer is connected to the rear
output, select
Sub. W
.
❒
When the rear output setting is
Sub. W
,
you cannot change the subwoofer control-
ler.
3
Touch “Preout” to switch the subwoofer
output or non fading output.
❒
Even if you change this setting, there is no
output unless you turn “
Non Fading
” or
“
Sub Woofer
” in the
Sound
menu “
On
”.
➲
“Using non fading output”
➞
Page 125
➲
“Using subwoofer output”
➞
Page 125
❒
If you change the subwoofer controller
(
Rear SP
), the subwoofer output (
Sub
Woofer
) and non fading output (
Non Fad-
ing
) in the
Sound
menu return to the fac-
tory settings.
❒
Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting.
Editing the PIN code
You can edit the PIN code you like. Use this func-
tion when you need to change the PIN code from
the default setting.
1
Touch “PIN Edit” in the Initial menu.
2
Touch number key to enter the new PIN
code.
3
Touch “Enter” to fix the new PIN code.
❒
The default setting of the PIN code is
0000
.
Switching the sound muting/
attenuation
Sound from this system is muted, attenuated or
mixed automatically in the following cases:
• When a call is made or received using a cellu-
lar phone connected to navigation system.
• When the voice guidance is output.
❒
The sound muting/attenuation function does
not work when you use a cellular phone con-
nected to the navigation system via the Blue-
tooth adapter, which is sold separately.
❒
When 5.1ch setting is “
On
”, the sound mut-
ing/attenuation setting is not available.
Version of the Bluetooth module
System (microprocessor) version
PIN code
Bluetooth Device (BD) address
Initia
l Settings
Содержание AVIC N4 - Navigation System With DVD player
