PSEN op2H-SL Series
Operating Manual PSEN op2H-SL Series
1004304-EN-01
6
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Overview
Safety light grids in the PSEN op2H-SL Series constitute electrosensitive protective equip-
ment (ESPE type: 2) in accordance with DIN EN 61496-1 and DIN EN 61496-2 (AOPD) for
workspaces in which machines, robots, and automated systems might pose a physical
danger to their operators.
Unit features
}
Resolution: 24 mm
}
Infrared protected field is generated
}
LED indicator for status information
}
Optical synchronisation of transmitters and receivers
}
Connection to evaluation devices (see
System connection [
35]
)
with 5-pin M12 one-sided connector and open cable end connection to clamping
sleeves
}
EDM (when connected to a relay with positive-guided contacts)
}
Cascading
Max. 2 slave units to one master unit
}
Front panel of PMMA
}
No dead zone in any protected field heights
}
Dimensions of safety light grid profile: 15 x 32 mm
}
Three different brackets used to install the safety light grid
– PSEN op SL Bracket C (included) for lateral attachment to the safety light grid pro-
file
for minimum length of installation
– PSEN op SL Bracket O (included) for attachment to the safety light grid caps
for minimum width of installation
– PSEN op SL Bracket L (can be combined with PSEN op SL Bracket C)
for attachment where there is strong vibration
}
Die-cast zinc end caps (Zamak)
