4.3.2
Apply rain repellent coating to the PPG windshields
WARNING
PUT ON PROTECTIVE CLOTHING, GLOVES, PROTECTIVE GOGGLES AND A
RESPIRATOR BEFORE YOU APPLY RAIN REPELLENT. THIS WILL HELP PREVENT
DEATH OR INJURY TO PERSONNEL.
WARNING
DO NOT TOUCH THE HEATING BLANKET WHEN IT IS ON. THE HEATING BLANKET
GETS HOT. HOT SURFACES CAN CAUSE INJURY TO PERSONNEL.
CAUTION
DO NOT LET ISOPROPANOL TOUCH THE WEATHER SEAL. ISOPROPANOL CAN
CAUSE DAMAGE TO THE WEATHER SEAL.
CAUTION
THE FLIGHT COMPARTMENT WINDOWS HAVE AN ANTISTATIC LAYER ON THE
OUTER SURFACE. POLISH THE WINDOWS EVENLY AND A MAXIMUM OF TWO
TIMES. IF THE WINDOWS ARE POLISHED TOO MUCH THE ANTISTATIC LAYER
CAN BE DAMAGED.
CAUTION
DO NOT USE OTHER SOLVENT OR ABRASIVE MATERIAL. IT CAN CAUSE
DAMAGED TO THE WINDSHIELD AND / OR AIRCRAFT STRUCTURE.
Note
Only the Master kit, surface seal rain repellent and the Quick application kit, surface seal
is approved for the PPG windows.
Note
For more information there is a product manual in the master kit, surface seal or the quick
application kit, surface seal. For training on the procedure there is a product video in the
master kit.
Note
The heating blanket temperature is pre-set for the necessary curing temperature.
Note
Pilatus Aircraft Limited recommend you heat cure the windshield. If you do not heat cure
the windshield the recommended rain repellent inspection interval is reduced. The
recommended inspection interval is published in the Flight Crew Operators Manual and
the Ground Servicing Manual.
Section 2 - Aircraft Servicing
Ground Servicing Guide
Report No: 02484
Issue date: Nov 30, 2020
Page 2-4-10
PC24-A-A15-12-0050-01A-250A-A