15
Note
It is necessary to do this step in less than 10 minute to prevent contamination.
Apply the rain repellent as follows:
15.1
Use a new pair of disposable gloves.
15.2
Apply a small amount of rain repellent onto a paper towel.
15.3
Apply the rain repellent to the windshield glass surface with short, circular
movements.
15.4
Let the applied layer of rain repellent dry for approximately 10 min.
15.5
Use paper wipes to remove the unwanted rain repellent from the windshield
glass surface. Change the paper wipes frequently.
15.6
Apply buffing solvent as necessary to a dry paper towel and remove all the
remaining unwanted rain repellent.
15.7
Spray the windshield glass surface with deionized water and clean with a dry
paper towel.
15.8
Discard the used paper towel, the paper wipes, and the disposable gloves.
15.9
Attach a windshield label inside the flight compartment adjacent to the
windshield with the date that the rain repellent was applied.
15.10
Remove the masking tape from around the edges of the windshield.
15.11
Remove all the equipment, tools, and materials from the work area. Make sure
that the work area is clean.
16
Do a check of the windshield rain repellent. Do
Check the condition of the rain repellent
Section 2 - Aircraft Servicing
Ground Servicing Guide
Report No: 02484
Issue date: Nov 30, 2020
Page 2-4-9
PC24-A-A15-12-0050-01A-250A-A