Phoenix Contact FL WLAN 24 AP 802-11, Руководство пользователя

Страница: 97 / 122

Technical data
7190_en_02 PHOENIX CONTACT
4-1
4 Technical data
General data
Function Wireless access points or clients; conform to standard IEEE 802.11b/g
Housing dimensions (width x height x depth) in mm
External dimensions without antenna 250 x 160 x 65
External dimensions with two antennas 427 x 337 x 65
External dimensions with four antennas 604 x 337 x 65
Permissible operating temperature -20°C to +55°C
Permissible storage temperature -40°C to +70°C
Degree of protection IP65
Humidity
Operation 10% to 85%, no condensation
Storage 10% to 85%, no condensation
Mounting position Any
Connection to protective earth ground By fixing the mounting plate onto a grounded mounting surface or via eyelet
rings in the wiring space
Configuration Web-based management via http or https, password-protected
Weight 1000 g, typical
Supply voltage
Connection Via COMBICON; conductor cross-section = 2.5 mm
2
, maximum
Nominal value 24 V DC
Permissible voltage ranges 18.5 V DC to 30.5 V DC
Current consumption at 24 V 400 mA, recommended fuse: 2 AT
Power over Ethernet According to IEEE 802.3af
Protection class III
Interfaces
RJ45 Ethernet interface
Number 1
Connection format RJ45 female connector on the device
Data transmission rate 10/100 Mbps
Segment length 100 m
Wireless interface
Wireless standards IEEE 802.11a/b/g/h
Automatic or manual channel selection
2.4 GHz: 13 channels according to 802.11b/g
5 GHz: Up to 19 channels according to 802.11a in accordance with standard
802.11h
Data transmission rate According to 802.11b (11 Mbps), according to 802.11g (54 Mbps), 802.11a/h
(54 Mbps), automatic rate selection (ARS) or fixed rates
Maximum transmission power at the R-SMA connection For 802.11a: 18 dBm at 6 Mbps, 12 dBm at 54 Mbps
For 802.11b: 19 dBm
For 802.11g: 19 dBm at 6 Mbps, 14 dBm at 54 Mbps