Phoenix Contact FL WLAN 24 AP 802-11 Скачать руководство пользователя

Страница: 4 / 122

FL WLAN 24 AP 802-11

PHOENIX CONTACT

7190_en_02

Please observe the following notes

In order to ensure the safe use of the product described, you have to read and understand

this manual. The following notes provide information on how to use this manual.

User group of this manual

The use of products described in this manual is oriented exclusively to qualified electricians

or persons instructed by them, who are familiar with applicable standards and other

regulations regarding electrical engineering and, in particular, the relevant safety concepts.

Phoenix Contact accepts no liability for erroneous handling or damage to products from

Phoenix Contact or third-party products resulting from disregard of information contained in

this manual.

Explanation of symbols used and signal words

The following types of messages provide information about possible property damage and

general information concerning proper operation and ease-of-use.

This is the safety alert symbol. It is used to alert you to potential personal injury

hazards. Obey all safety messages that follow this symbol to avoid possible

injury or death.

DANGER

This indicates a hazardous situation which, if not avoided, will result in death or serious

injury.

WARNING

This indicates a hazardous situation which, if not avoided, could result in death or serious

injury.

CAUTION

This indicates a hazardous situation which, if not avoided, could result in minor or

moderate injury.

NOTE

This symbol and the accompanying text alerts the reader to a situation which may cause

damage or malfunction to the device, either hardware or software, or surrounding

property.

This symbol and the accompanying text provides additional information to the reader. It is

also used as a reference to other sources of information (manuals, data sheets, literature)

on the subject matter, product, etc.

Содержание FL WLAN 24 AP 802-11



























































































































Результаты поиска

Содержание FL WLAN 24 AP 802-11

Отзывы:

Похожие инструкции для FL WLAN 24 AP 802-11

Бренды по названию

Популярные бренды

Phoenix Contact FL WLAN 24 AP 802-11, Руководство пользователя

Результаты поиска

Содержание FL WLAN 24 AP 802-11

Отзывы:

Похожие инструкции для FL WLAN 24 AP 802-11

Бренды по названию

Популярные бренды