Phoenix Contact FL WLAN 24 AP 802-11, Руководство пользователя

Страница: 24 / 122

FL WLAN 24 AP 802-11
2-2
PHOENIX CONTACT 7190_en_02
Wireless transmission
– Manual or automatic channel selection depending on the country settings
– Manual specification of the data transmission rate or automatic regulation to the
maximum permissible data transmission rate
Client operating modes
– Single Client Bridge
Only one wired device can establish a connection to the access point at a client. This
operating mode is compatible with that of other manufacturers.
– Fully Transparent Bridge - Only possible with Phoenix Contact devices.
An entire network can be connected to an access point via a single client. Advantages:
No limit to the number of wired devices, client or access point can be easily changed,
and no limit to the number of connections.
Roaming
– Standard roaming: Fastest possible roaming using limited channel lists, roaming
thresholds, and configurable active scanning
– Tabular roaming: Configurable fixed order of access points, e.g., for linear vehicle
systems (including Modbus/TCP API or SNMP interface for direct control of the
response)
Filter wizard
– The filter wizard can be used to filter WLAN and Ethernet data. Predefined filter records
for standard communication requirements and simple, menu-led creation of new filter
records make configuration easy.
Power over Ethernet (PoE)
Support of Power over Ethernet according to 802.3 af.
2.2 Properties
Factory Line WLAN components are industrial components used to create wireless
networks according to IEEE 802.11b/g. Three components are available:
– FL WLAN 24 AP 802-11
Single access point according to IEEE 802.11 a/b/g/h.
– FL WLAN 24 EC 802-11
Ethernet client for operation at Factory Line access points.
– FL WLAN 24 DAP 802-11
Dual access points according to IEEE 802-11 a/b/g/h.
– FL WLAN 230 AP 802-11
Single access point according to IEEE 802.11 a/b/g/h with 230 V AC supply.