Phoenix Contact FL WLAN 24 AP 802-11 Скачать руководство пользователя страница 71

Страница: 71 / 122

Startup and functions

7190_en_02

PHOENIX CONTACT

3-37

"CTS/RTS threshold"

Here you can specify at which maximum data frame the CTS/RTS handshake method will

be activated before transmitting data.

"Fragmentation threshold"

If a packet exceeds the value entered here, the packet is fragmented and divided into

smaller packets.

"Long distance"

If a long distance has to be covered between two devices, the timeout can be extended by

entering the distance here (in meters). The increased timeout means that the access point

waits longer to receive a response from the partner.

"Transmission antenna"

Here you can specify which antennas operate as transmitting antennas. "Automatic" is

recommended if the same antennas are used. If different antennas are used, e.g., a panel

antenna and an omnidirectional antenna, the omnidirectional antenna should be specified

as the transmitting antenna.

"Antenna gain"

The transmission power for the various antenna types and cable lengths can be set here.

Select the antenna/cable combination used. The transmission power for antennas in

Europe in the

2.4 GHz ISM band is limited to 20 dBm. The maximum permissible value that can be

entered in WBM is calculated according to the following formula:

20 dBm + Cable/connector attenuation - Antenna gain = Maximum permissible value

"Power constraint"

The power constraint setting limits the transmission power of the access point to the

specified value. If TPC is activated, the value entered here is transmitted to all clients, which

have access to the access point.

If TPC is not activated, this parameter, together with the set antenna gain, specifies the

maximum transmission power for the female antenna connector.

3.5.4.3

"Network" menu (only in "Client" mode)

In the "Network" menu the necessary settings are made to replace a cable route with two

clients. This operating mode is known as "Bridge" mode.

Modifications to the "CTS/RTS threshold" settings are not activated until the next device

restart.

The "Fragmentation threshold" function cannot be used under WPA.

In order to limit the radio field (interference/security) it may be useful to reduce the

transmission power.

Please note that the MAC address must be entered in the following format (with colon):

AA:BB:CC:DD:EE:FF

Содержание FL WLAN 24 AP 802-11



























































































































Результаты поиска

Содержание FL WLAN 24 AP 802-11

Отзывы:

Бренды по названию

Популярные бренды

Phoenix Contact FL WLAN 24 AP 802-11, Руководство пользователя

Результаты поиска

Содержание FL WLAN 24 AP 802-11

Отзывы:

Бренды по названию

Популярные бренды