•
A
SY M M E T R I C
:
Use this setting if the ports on the P430 in the group
are connected to a switch (or switches) that do not support trunking.
Under this setting, the P430 will balance the outgoing load across
all the ports in the group, but incoming data will only be received
on one port.
•
F
A I L O V E R
O
N LY
:
This setting enables only failover capability.
Only one port will be used at a time, with the link(s) serving as
backup. NOTE: that the Symmetric and Asymmetric trunking
modes also support failover. Use this setting only to obtain
failover functionality without trunking.
6.
Repeat the steps above to create other groups or trunks. You
can delete groups by highlighting the group and clicking on
“Delete Group.”
7.
Click “OK.” See figure 5-1
See Chapter 7 for more detail on the PhobosLink features.
5– 8
Содержание P430
Страница 1: ......
Страница 32: ...4 14...
