Phobos P430, Руководство пользователя

Страница: 54 / 81

C O N F I G U R I N G T H E I N T E R F A C E
You can manually configure the interface or use ‘linuxconf’ to
configure the interface. These instructions are for manually
configuring the interface and must be executed for each card.
1.
Create the file /etc/sysconfig/network-scripts/ifcfg-pgeX or
ifcfg-plinkX (where X corresponds to the interface number)
2.
Edit the file created to add the following information with the
appropriate values.
For example;
DEVICE=pge0 (or plink0 if using PhobosLink)
IPADDR=192.0.2.1
NETMASK=255.255.255.0
NETWORK=192.0.2.0
(This is the logical AND of the IPADDR & NETMASK)
BROADCAST=192.0.2.255
(This is the logical OR of the NETWORK
and the inverse of the NETMASK)
ONBOOT=yes
3.
Edit the file /etc/conf.modules
Add the lines:
alias pgeX p1000
alias plinkX plink
4.
Use the ‘ifup’ command to determine if the interface is working.
# ifup pgeX
INSTALLING
DRIVER
SOFTWARE