Phobos P430, Руководство пользователя

Страница: 48 / 81

2. Now configure the PhobosLink interfaces by running the appli-
cation plink_config.
3.
Configure the Hosts File
After installing the Phobos Quadport 10/100 driver software, you
must create a hostname.plink<num> file for the adapter's Ethernet
interfaces. You must also create both an IP address and a host name
for its Ethernet interfaces in the /etc/hosts file.
Create an /etc/hostname.plink<num> file, where <num> corresponds
to the instance number of each trunk group you plan to use. If you
wanted to use all of the adapter's interfaces into one trunk group,
then you would need to create 1 file: For Example
Filename Instance Number
/etc/hostname.plink4 4
• Once the hostname file has been created, add the interface name in
plain text into the body of the file.
• Do not create /etc/hostname.plink<num> files for Phobos Quadport
10/100 PCI adapter interfaces you plan to leave unused.
• The /etc/hostname.plink<num> file must contain the hostname for
the appropriate network interface.
• The host name should have an IP address and should be entered in
the /etc/hosts file.
4.
Reboot your system by typing either:
# boot -r
or
# reboot
6-8